S60 2.4 L5-2.4L VIN 61 B5244S (2001)
Vacuum Pump: Service and Repair
Replacing the vacuum pump
Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.
Preparatory work
Ignition off.
Disconnect the battery negative lead. See: Battery, disconnecting See: Starting and Charging/Battery/Service and Repair/Procedures/Battery,
Disconnecting.
Removing the vacuum pump
Remove:
-
the hose (1)
-
the connector (2).
-
the 2 x screws (3)
-
the pump.
Note! For tightening torques, see: Tightening torque See: Specifications/Mechanical Specifications/Steering.
Fitting of vacuum pump
Install:
-
the pump.
-
the 2 M6 screws.
-
the hose
-
the connector.
Finishing
Install the battery negative lead according to: Battery, disconnecting See: Starting and Charging/Battery/Service and Repair/Procedures/Battery,
Disconnecting.