S60 2.4 L5-2.4L VIN 61 B5244S (2001)
Receiver Dryer: Service and Repair
Pipe, Receiver/Drier, Replacing
Pipe, Receiver Drier, Replacing
Removal
NOTE: For cars with chassis numbers up to -86697, see vcc-126896
Receiver drier hoses
-
Remove the condenser.
-
Detach the pipe coupling from the receiver/dryer.
-
Detach the pipe from the bracket. Remove the pipe.
Installation
Receiver drier hoses
NOTE: Use new O-rings lubricated with compressor oil.
-
Position the pipe on the mounting in the bracket. Position the pipe coupling on the receiver/dryer.
-
Position the screw and tighten the pipe coupling on the condenser.
Tighten to 10 Nm.
-
Install the condenser.