S60 2.4 L5-2.4L VIN 61 B5244S (2001)
Caution! The crankshaft must not rotate!
Removing the belt tensioner and idler pulley
Remove the belt tensioner and idler pulley.
Check the rolling surface and the bearings.
Check for any noise. Check for any play in the bearings.
Check that the rolling surfaces are smooth and clean.
Removing oil pump
Remove the belt protection from the oil pump.
Remove the four oil pump screws.
Carefully work the oil pump out. Use a groove-cut chisel with stop lugs.
Carefully draw the oil pump past the end of the crankshaft.
Carefully clean the gasket face and mating surfaces.
Checking the oil pump