S60 2.4 L5-2.4L VIN 61 B5244S (2001)
Intake Air Temperature Sensor: Service and Repair
OUTSIDE TEMPERATURE SENSOR DOOR MIRROR, REPLACING
Removal
Preparatory work
Note! As the illustrations in this service information are used for different model years and I or models, some variation may occur. However, the
essential information in the illustrations is always correct.
Ignition off.
Remove the door mirror. See: Testing and Inspection/Component Tests and General Diagnostics/Component Access/Replace Procedures/Replacing
the Mirror
Removing the outside temperature sensor
Remove the temperature sensor using a screwdriver as illustrated
Disconnect the terminal pin from connector
Remove the temperature sensor.
Installation
Installing the outside temperature sensor
Route the cable for the temperature sensor to the connector.
Install the terminal pin in the connector.
Press the temperature sensor in the door mirror.
Finishing work
Install the door mirror. See: Testing and Inspection/Component Tests and General Diagnostics/Component Access/Replace Procedures/Replacing the
Mirror