S60 2.4 L5-2.4L VIN 61 B5244S (2001)
Raise the car
Remove:
-
the connector from the control unit
-
control module from the vehicle
-
cable harness from its brackets
-
cable harness from the vehicle
Check that the fuel line is located in its clamps.
Vehicles with fuel pump module located in spare wheel well's right trailing edge.
Remove:
-
luggage compartment mat/floor hatches so that spare wheel well can be released
-
the connector from the control unit
-
the control module from Velcro fastener
Installation
Vehicles with fuel pump module originally located on fuel tank.
Connect a new cable harness to the connector by the sill and the fuel tank.
Place the cable harness in the seal ring's slot and in the bracket on the body.
Install the floor hatch and tighten with 6 Nm.