S60 2.4 L5-2.4L VIN 61 B5244S (2001)
-
Insert the wiring through the hole in the new steering wheel
-
Carefully install the new steering wheel by holding it straight and aligning the locating pins (1) on the contact reel
-
Remove the screw from the contact reel. Reinstall the screw in the holder. (See point Leather steering wheel See: ).
-
Insert the wiring through the hole in the vibration damper (1) if applicable. Install the vibration damper using the screw in the steering wheel (see
point Leather steering wheel See: ). Tighten the screw. Tighten to 40 Nm (30 lbf.ft.).
Note! Take care with the SRS (supplemental restraint system) wiring.
-
Connect the connectors for SRS (supplemental restraint system)
-
Connect the other connectors
-
Reinstall the steering wheel module on the new steering wheel. Check that no wiring is trapped.