S60 2.4 L5-2.4L VIN 61 B5244S (2001)
-
Measure the position of the wheel spindle and spring strut. See Wheel Knuckle / Spring Strut, Calibrating
-
Slacken off both the screws retaining the spring strut in the wheel spindle. Do not remove the screws yet.
-
Remove the tie rod end from the steering arm.
-
Remove both the screws retaining the spring strut in the wheel spindle
-
Press out the wheel spindle. At the same time pull the drive shaft from the transmission
-
Hang the drive shaft from a hook 999 5045.
Note: Take care not to damage the drive shaft boot.