S60 2.4 L5-2.4L VIN 61 B5244S (2001)
Disconnect the connector.
Installing the acceleration sensor
Note! It is essential that the acceleration sensors are installed with the connector facing upwards and is secure in the vehicle. Otherwise
movement may result in incorrect values being returned to the system, with poorer driving characteristics, when cornering for example, as a
result.
Note! For tightening torques, see Tightening torque See: Specifications/Mechanical Specifications/Starting and Charging/System Specifications.
Install the M10 nut.
Connect the connector.
Test the function.