S60 2.4 L5-2.4L VIN 61 B5244S (2001)
Note! Applies only to right-hand drive vehicles.
Install the screws for the collision protection system. Tighten. See applicable specifications
Install:
-
the bracket for the heated oxygen sensor (HO2S).
Note! Applies only to right-hand drive vehicles.
-
the cross member.
Ensure that the brake pipe is pressed into place in its holder.
Tighten the member. See applicable specifications
Install:
-
the screw for the cable conduit
-
the holder for the ground lead.
Note! Only applies to vehicles with parking heaters:
Install:
-
the heater to the sub-frame
-
the fuel line for the heater to the holders on the sub-frame