S60 2.4 L5-2.4L VIN 61 B5244S (2001)
-
Position the hook 3 mm (1/8") behind the front limit position of the hook.
-
Clean the marked surface on the inside of the window using a wet wipe (from the kit). Allow the window to dry.
-
Install the marking tape on the inside of the window in front of the hook and 2 mm (5/64") under and parallel with the upper edge of the window as
illustrated. (The hook must remain in the same position behind its front limit position.)
-
Hang the hook up centrally over the marking tape on the window. The hook must always hang over the centre of the marking tape when using the
sun blind.
-
Repeat points 1 -5 for the other sun blind.
Function test
-
Check the function. Raise and lower the side window.