S60 2.4T L5-2.4L Turbo VIN 58 B5244T3 (2001)
Fuel Pressure: Testing and Inspection
Checking Fuel and Residual Pressures
Checking fuel and residual pressures
Note! For vehicles with demand activated fuel pumps (FP), see VIDA vehicle communication Quick test of fuel pump (FP).
Measuring the line pressure
-
Connect the pressure gauge according to Fuel pressure gauge See: Fuel Pressure Gauge
-
Remove the soundproofing panel
-
Remove the fuel pump (FP) relay (CMI 12 in the passenger compartment)
-
Connect a cable to the relay base as illustrated.
Read off the line pressure from the pressure gauge. The line pressure must be 375-395 kPa.
Check the residual pressure if the fuel pressure is OK.
Remedy as necessary.
Other information:
-
For the location of and to replace the fuel pump (FP) relay, see Central electronic module (CEM), replacing See: Computers and Control
Systems/Body Control Module/Service and Repair/Central Electronic Module (CEM), Replacing
-
For the location of and to replace the fuel pump (FP), see
-
For the location of and to replace the fuel filter, see Replacing the fuel filter See: Fuel Filter/Service and Repair
-
To disconnect the pressure gauge, see Fuel pressure gauge See: Fuel Pressure Gauge
Checking the residual pressure