S60 2.5T L5-2.5L Turbo VIN 59 B5254T2 (2006)
Remove
-
the nut on the ball joint. Use a Torx wrench as a counterhold so that the boot is not damaged
-
wheel spindle.
For steel control arm, see: Ball joint, replacing See: Ball Joint/Service and Repair
Installing the wheel spindle
Install
-
the wheel spindle on the trailing arm
-
a new nut on the ball joint. Tighten. See: Tightening torque See: Steering/Specifications. Use a Torx wrench as a counterhold to prevent damaging
the boot.
For steel control arm, see: Ball joint, replacing See: Ball Joint/Service and Repair
Note! Make sure that the mating surfaces on the ball joint and control arm are clean.