S60 2.5T L5-2.5L Turbo VIN 59 B5254T2 (2006)
-
Pull up the panel with the boot towards the gear selector lever knob
-
Pull the locking sleeve up to the gear selector lever knob. Turn the locking sleeve slightly so that the guide (1) inside the locking sleeve is correctly
positioned on the notch (2) on the gear selector lever knob
-
Pull the locking sleeve until it locks. Check that the locking sleeve is securely mounted on the gear selector lever knob. Pull the gear selector lever
knob to check that it is securely mounted
-
Lower the panel. Press the panel into place in the centre console.
Top Panel Gear Selector Assembly, Replacing
43: Top panel gear selector assembly, replacing
NOTE: As the illustrations in this service information are used for different model years and/or models, some variation may occur. However, the
essential information is always correct.
Removal
Removing gear selector lever knob
Press down gear selector lever knob. At the same time turn a quarter of a turn to the left. Pull the gear selector lever knob straight up.
Removing the top panel