S60 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2004)
-
Detach the rear edge of the gear selector lever cover together with the boot until the two clips release. Use a plastic weatherstrip tool. Remove the
gear selector lever cover and the boot. Pull the panel up until the four clips at the sides release.
-
Remove the panel around the gear selector. It is held in place with four catches.
Only for cars without pre-routed Melbus cable
-
Engage the handbrake and move the gear selector lever towards the rear.
-
Remove the two screws holding the bracket with the radio and dashboard environment panel in the centre console.