S60 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2004)
-
Reinstall the cover on the connector
-
Reconnect the connectors to the fuse holder. Tighten the screw.
Illustration D
Applies to:
-V70 with VIN marking position 8=1 and chassis numbers from and including 287167
-V70 with VIN marking position 8=2 and chassis numbers from and including 286000
-V70 XC / XC 70 with chassis numbers from and including 95082
Note! The wiring is connected to connector D.
Insert a small screwdriver in the socket as illustrated
-
Twist the screwdriver so that the holders open. At the same time, press the connector out to the side
-
Connect the violet (VO) cable to terminal 2
-
Reinstall the connector
-
Reinstall the cover on the connector
-
Reconnect the connectors to the fuse holder. Tighten the screw.
-
Install the red (R) cable (1) in position 13. Press the cable into the fuse holder from the reverse
-
Install a 30 A fuse from the kit in position 13
-
Reinstall the fuse holder.