S60 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2004)
Seat Heater: Service and Repair
Heater Pad, Replacing
First Generation Power Seats
Heater pad, replacing
Special tools:
115 8962 CRIMP PLIERS See: Tools and Equipment/115 8962 Crimp Pliers
Preparations
Remove the seat or the cushion / backrest
-
Remove the relevant seat or the cushion / backrest. See Lifting the front seats in and out See: Service and Repair/Removal and Replacement or
Rear seat assembly See: Service and Repair/Removal and Replacement/Rear Seat/Rear Seat Assembly.
Important
Caution! The old heater pad must be removed first. A new heater pad must not be bonded over the old pad.
Note! Read through the entire section before beginning work.
Types of heater pad
-
A sequence of illustrations displaying a number of different heater pads for both the seat cushion and the backrest now follows
Caution! It is imperative that the correct type of heater pad is used to match the shape of the foam filling.
-
The heater pads displayed in the stages below apply to both the front and rear seats.
General information about different types of heater pads
Heater pads for front seats
Heater pad for backrests and cushions, front seats