S60 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2004)
-
Take the connector (2) from the kit. Open the catch
-
Connect the cable harness for the spoiler to the connector. Connect the red (R) cable to position 1. Connect the black (SB) cable to position 5
-
Press the catch together
-
Connect the existing brake lamp cable (1) to the new connector as illustrated.
-
Secure the connectors using the tie strap
-
Clamp the cables to each other. Use two tie straps from the kit.
-
Check the function of the brake lamp
-
Reinstall the panels on the tailgate
-
Post-tighten the screws for the spoiler to the correct torque. See point 12.
Roof Spoiler With Stop Lamps
Roof spoiler with stop lamps