S60 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2004)
-
Mark through the template and on the boot lid using an awl.
Note! Press carefully as the panel section is made of plastic.
Illustration C
-
Open the boot lid. Position the boot lid as illustrated. To achieve the correct drilling angle, the distance from the join between the plastic and the
panel for the rear wing must be 135 mm (5 5/16")
-
Place an object under the lid to provide support.
-
Pre-drill straight through the boot lid. Use a 3 mm (1/8") diameter drill bit.
Note! Drill carefully as the panel is made of aluminium.
