S60 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2004)
Drill out the 2 rivets at the front on the underneath of the front spoiler. See: Removing rivet .
Use a weatherstrip tool to detach the front spoiler from the bumper cover.
Hint: If the spoiler is difficult to remove, use a hot-air gun and heat gently.
Installation
Preparatory work before installing the front spoiler
Remove any tape residue from the components and the vehicle. Use: 951 2942 Circle See: Tools and Equipment/951 2942 Circle and: 951 2949 Holder
See: Tools and Equipment/951 2949 Holder.
Use primer intended for tape on PP/EPDM components. Wash the bumper cover at the join between the painted and unpainted section.
Use primer intended for tape on PUR components. Wash the spoiler where the tape will be applied.
