S60 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2004)
Install 2 spring clips at the drilled holes (1) in the bumper cover.
Install spacers (2) between the spoiler and the bumper cover.
Install the screws (3) in the spring clips. Ensure that the screws run through the spacers. Tighten to 10 Nm.
Install the cover for the towing eyelet on the spoiler.
Insert the hooks in the top edge.
Lock the cover using 2 press clips in the bottom.
Note! The original cover for the towing eyelet must be cut off and kept in the vehicle.
Finishing
Important information