S60 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2004)
Note! To achieve a good result, 2 people are needed to press the spoiler onto the trunk lid.
Install the bushings in the drilled holes in the trunk lid.
Grasp each end of the spoiler and carefully slide the locating pins into the holes in the trunk lid.
Press the spoiler firmly into place on the trunk lid.
Open the trunk lid. Remove the 2 locating pins.
Apply locking fluid to the screw threads.
Install 2 M6 screws and plastic washers in the spoiler.
Tighten the screws. Tighten to 5 Nm.
Caution! Do not over tighten.
Finishing
Important information
Leave the vehicle indoors for 2 hours after finishing the work.
To ensure optimal adhesion, do not wash the car for 48 hours.