S60 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2004)
Insert the jimmy between the brake pads (as a counterhold) to keep the piston in.
Open the bleed nipple, approximately one turn.
Pressurize the braking system using the bleeding unit
Leave the bleed nipple open until the new brake fluid enters.
Close the nipple. Remove the hose.
Reinstall the protective cap on the bleed nipple.
Remove the jimmy between the brake pads.
Install the brake caliper
See Brake pads rear, replacing, B5244T5, B5254T2 See: Disc Brake System/Brake Pad/Service and Repair/Brake Pads Rear, Replacing.
Remove the bleeding unit
See Remove the bleeding unit.
Finishing work
See Finishing work.