S60 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2004)
Insert the key in the steering wheel lock.
Pull theuppersteering shaft down. Secure it on thelowersteering shaft.
Install the nut. Tighten to 30 Nm.
Note! Use new screw and locknut.
Install:
-
the stop lamp switch. See Stop lamp switch, replacing See: Lighting and Horns/Brake Light Switch/Service and Repair
-
the push rod and the clip. See Stop lamp switch, replacing See: Lighting and Horns/Brake Light Switch/Service and Repair.
R.H.D.
Bushing, brake pedal, replacing
Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.
Preparatory work
Remove the brake lamp switch in accordance with: Stop lamp switch, replacing See: Lighting and Horns/Brake Light Switch/Service and Repair.
Remove the relay box from its bracket