S60 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2004)
Install
-
new sealing rings in the oil pan
-
the oil cooler. Tighten
-
the oil filter.
Installing the rear crankshaft seal
Use standard handle 999 1801 STANDARD SHAFT See: Tools and Equipment/999 1801 Standard Shaft and drift 999 5676 Drift replaced by 9997174
See: Tools and Equipment/999 5676 Drift Replaced By 9997174.
Lubricate the drift face and thread the sealing ring onto the drift.
Tap in the seal until the drift bottoms against the block.