S60 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2004)
-
Screw the turbocharger stay in the turbocharger with the short screw (2) and into the other mounting in the engine block with the screw (3).
-
Tighten the screws to 16 Nm (12 lbf.ft.).
-
Take the radiation protection and cable from the kit. Thread the radiation protection onto the cable and connect the cable to the heater
-
Install the locking sleeve on the heater's connector.
Install:
-
air baffle
-
the splash guard. Tighten the screws to 25 Nm (18.5 lbf.ft.).
-
the decal from the kit.