S60 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2004)
Raise the car.
Remove
-
the right front wheel
-
the plastic nuts on the cover in the fender liner.
Install the upper timing belt cover.
Turn the crankshaft clockwise until the markings on the crankshaft and camshaft pulleys correspond.
Turn the crankshaft a further 1/4 turn clockwise.
Then turn back counter-clockwise until the markings correspond.
Remove the upper timing belt cover.
Remove the 4 vibration damper screws. Counterhold the crankshaft central nut.
Remove
-
the vibration damper
-
the auxiliaries belt
-
the belt cover behind the crankshaft pulley for the auxiliaries belt.
Spray universal oil or similar around the rubber sleeve on the underside of the oil pump.
Remove the rubber sleeve.