S60 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2004)
-
Detach the pipe coupling from the receiver / dryer
-
Detach the pipe from the bracket. Remove the pipe.
Installation
Receiver drier hoses
Note! Use new O-rings lubricated with compressor oil.
-
Position the pipe on the mounting in the bracket. Position the pipe coupling on the receiver / dryer
-
Position the screw and tighten the pipe coupling on the condenser.
Tighten to 10 Nm.
-
Install the condenser. See Condenser, replacing See: Condenser HVAC/Service and Repair (engine B5254T4) or Condenser, replacing See:
Condenser HVAC/Service and Repair (other engines).