S60 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2004)
Position:
-
the climate control unit in the car
-
the member on the climate control unit
Note! Two people required.
Install:
-
the screws and the bracket on the member for the climate control unit.
-
Install and secure the cable duct
-
Check and position the cables for the radio and the dashboard environment unit.
-
Take out the cable for the sensor on the dashboard and light switch.
-
Position the member for the climate control unit against the firewall
-
Check the location in relation to the opening for the coolant and heat exchange pipes.
-
Press the member for the climate control unit into position against the firewall A-post
-
Secure the member for the climate control unit against the A-post loosely with the screws.
-
Secure the member for the climate control on the center console loosely using the screws.
Tighten:
-
the member on the A-post
-
the screws on the center console.
-
Install the air ducts.
Other work in the passenger compartment
-
In reverse order
-
The cross member must be tightened to the A-post. Tighten to 50 Nm
-
The screws in the center console must be tightened. Tighten to 25 Nm.