S60 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2004)
Control Module HVAC: Service and Repair
Comfort panel (including climate control module, CCM), replacing
Preparations
Note! Read off data from the control module before replacing the control module. This is carried out via VIDA vehicle communication. After
replacing the control module, the relevant parameters must be programmed into the new control module.
Replacing dashboard environment panel
Ignition off.
Remove the key.
Note! The key must be removed to ensure that the ignition is not switched on by mistake.
Note! After the key has been removed: Wait 3 minutes before starting work.
V70
V70 has a pen holder above the gear selector panel. Remove it. See Pen holder See: Body and Frame/Interior Moulding / Trim/Service and Repair/Pen
Holder.
Remove the panel (1) above the gear selector:
Carefully pry off at the back using a weatherstrip tool.
S80
Remove the panel (1) above the gear selector:
Carefully pry off at the back using a weatherstrip tool.
Note! The gear selector must be in the rearmost position before the comfort panel can be removed.