S60 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2004)
Fuel Level Sensor: Service and Repair
Level Sensor, Fuel Tank, Right-Hand/Fuel Tank, Replacing
Removal
NOTE: As the illustrations in this service information are used for different model years and/or models, some variation may occur. However, the
essential information in the illustrations is always correct.
Draining the fuel system and fuel tank
Drain:
-
the fuel system.
-
the fuel tank.
Removing the left-hand level sensor
Remove:
-
the two connectors from the underneath of the left-hand level sensor
-
the left-hand level sensor from the ejector on which it is positioned.
NOTE: Secure a wire in the area of the ejector.
The wire must be sufficiently long that it reaches over to the opposite side of the tank with some excess remaining to ensure that it does not slide into the
tank. The wire is needed to pull the hoses and wiring back to the left-hand side of the tank after the fuel tank unit has been replaced.
Removing the right-hand level sensor/pump