S60 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2004)
Install the four nuts and the screw holding the steering gear. Use new nuts and a new screw. Tighten to 50 Nm.
Right-hand drive:
Install nut (A) holding the lower half of the collision protection system. Tighten to 50 Nm.
Install the oil pipes. Use new O-rings.
Install the collision protection system over the steering gear (2 screws).
Tighten with 80 Nm.
Installing the cable harness for the heated oxygen sensors (HO2S)