S60 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2004)
-
the connector (1)
-
the screw (2) that holds the steering wheel, leave the steering wheel in place.
Remove:
-
the screw (1). Install the screw in the contact reel (2).
-
the steering wheel. Pull the wiring out through the hole in the steering wheel.
-
Remove the screw (1) and detach the ground lead.
Applies to cars without RTI keypad mounted to the steering wheel
-
Remove the three screws (2) and lift out the horn ring (3).
-
Place the steering wheel to one side.
Applies to cars with RTI keypad mounted to the steering wheel
-
Remove the three screws (2) and detach the horn ring (3).
Applies to cars with RTI keypad mounted to the steering wheel
-
Carefully rotate the horn ring upwards and position it as illustrated.