S60 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2004)
Control Arm Bushing: Service and Repair
Rear
Bushing Outer Control Arm Upper, Replacing
Bushing outer control arm upper, replacing
Special tools:
951 2923 Hydraulic hole cylinder See: Tools and Equipment/951 2923 Hydraulic Hole Cylinder
999 7030 Mounting bracket bushing replace See: Tools and Equipment/999 7030 Mounting Bracket Bushing Replace
999 7031 Locating pin See: Tools and Equipment/999 7031 Locating Pin
999 7035 Sleeve See: Tools and Equipment/999 7035 Sleeve
999 7036 Drift See: Tools and Equipment/999 7036 Drift
999 7038 Drift See: Tools and Equipment/999 7038 Drift
999 7039 Connecting rod M16X360 See: Tools and Equipment/999 7039 Connecting Rod M16X360
999 7054 Adapter incl. 2x MC6C M6X12 See: Tools and Equipment/999 7054 Adapter Incl. 2X MC6C M6X12
Removal
Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However,
the essential information in the illustrations is always correct.
Preparations
Remove the wheel.
Removing the shock absorber
-
Secure the control arms down. Use retaining straps
-
Remove the screws for the shock absorber mounting
-
Pull the shock absorber from its mounting
-
Release the retaining strap.