S60 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2004)
-
Install the engine block heater (if applicable) on the left front mounting for the sub-frame
-
Install the four screws in the sub-frame together with the sub-frame brackets. Use new screws. Lubricate the screws
-
First tighten the screws on the left-hand side of the sub-frame. Tighten to 105 Nm. Angle-tighten to 120 degrees. Then tighten the right-hand side
to the same values
-
Finally tighten the screws for the brackets on both sides to 50 Nm.
Finishing
Install