S60 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2004)
Front Cross-Member Bushing: Service and Repair
Bushing front sub-frame, replacing
Special tools:
951 2923 Hydraulic hole cylinder See: Tools and Equipment/951 2923 Hydraulic Hole Cylinder
999 5082 Socket See: Tools and Equipment/999 5082 Socket
999 7032 Sleeve See: Tools and Equipment/999 7032 Sleeve
999 7034 Connecting rod M12X400 See: Tools and Equipment/999 7034 Connecting Rod M12X400
999 7037 Connecting rod M14X400 See: Tools and Equipment/999 7037 Connecting Rod M14X400
999 7040 Drift See: Tools and Equipment/999 7040 Drift
999 7043 Drift See: Tools and Equipment/999 7043 Drift
999 7054 Adapter incl. 2x MC6C M6X12 See: Tools and Equipment/999 7054 Adapter Incl. 2X MC6C M6X12
Removal
Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However,
the essential information in the illustrations is always correct.
Preparations
Raise the car.
Remove:
-
left rear wheel
-
the exhaust system from the three-way catalytic converter (TWC) and backward. See Exhaust system, replacing See: Engine, Cooling and
Exhaust/Exhaust System/Service and Repair.
Applies only to All-wheel drive (AWD):
Remove the propeller shaft from the viscous coupling.
Removing the parking brake cable