S60 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2004)
-
Install the fuel filter and holder on the right bracket. Tighten to 25 Nm.
Remove the lifting table.
Finishing
-
Pop rivet the heat deflector for the exhaust pipe into the left rear mounting on the sub-frame
-
Install the fender liner. Tighten the fender liner with the plastic nut.
Install
-
the parking brake cable mounting in the subframe. Tighten to 25 Nm
-
the mounting for parking brake cable on the tie rod
-
the exhaust system.
-
the springs and shock absorbers.
Note: At the same time, tighten the tie rods and lateral links to the sub-frame. Tighten to 80 Nm.
Use tensioner 999 5659.
Press the cable sleeve guide sleeve into place in the mounting.
Install