S60 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2004)
-
the sealing ring from the drive shaft.
Remove
-
the nut on the ball joint. Use a Torx wrench as a counterhold so that the boot is not damaged
-
wheel spindle.
Installing the wheel spindle
Install
-
the wheel spindle on the trailing arm
-
a new nut on the ball joint. Tighten. Use a Torx wrench as a counterhold to prevent damage to the boot.
Note: Make sure that the mating surfaces on the ball joint and link are clean.
Installing the sealing ring
-
Note: Check that the sealing ring is not worn or damaged. Replace if necessary. Ensure that the sealing ring is correctly positioned on the drive