S60 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2004)
Remove the EVAP canister
Remove:
-
the mountings for the EVAP canister
-
the collision protection system.
Four-C only
Remove the cable harness for the shock absorber.
Installation
Note! For further information about tightening torques, see Tightening torque See: Steering/Specifications/Mechanical Specifications.
Note! To ensure that there is no exhaust leakage, see: Flanged joint, assembling See: Engine, Cooling and Exhaust/Exhaust System/Exhaust
Pipe/Service and Repair/Flanged Joint, Assembling.
Installing components on the subframe