S60 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2004)
Transmission Speed Sensor: Service and Repair
Input Speed Sensor/Output Speed Sensor, Replacing
Input speed sensor/output speed sensor, replacing
Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However,
the essential information is always correct.
Removal
Preparations
Switch off the ignition.
Removing the air cleaner (ACL) housing
Ignition off.
Remove the air cleaner housing ACL assembly with the intake pipe.
1. The intake manifold
2. The hose from the mass air flow (MAF) sensor
3. Connector.
Pull the air cleaner (ACL) housing out of its mountings.
Removing the cable harness
Remove the mounting for the cable harness from the cover for the control system.
Unhook the mounting with the connectors for the cable harness from the bracket for the air cleaner (ACL) housing.
Remove the tie straps from the cable harness.
Separate the connectors for the transmission output speed sensor and the transmission input speed sensor.
Unhook the connectors from the mounting.
Clean thoroughly around the sensors.
Remove the sensors and the cable harness.
Installation