S60 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2004)
Turn the ignition key to position 0.
Move the gear shift lever to position P.
Position a 5 mm drill bit in the housing above the yellow locking sleeve. This is to get the lever into the secured position.
Install the cable on the housing and on the threaded end in the groove on the yellow locking sleeve.
Press the locking sleeve so that it locks the cable.
Check
Check that the keycannotbe removed when the gear selector is inany other position than P.
Installing the center console
S60R (B5254T4 engine)
Install the center console. See Center console, replacing See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Center Console,
Replacing.
S60 (other engines)
Install the center console. See Center console, replacing See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Center Console,
Replacing (-2004) or Center console, replacing See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Center Console, Replacing
(2005-).
Gear Selector Lever Assembly, Replacing