S60 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2004)
-
the key lock cable. Pry out the yellow locking sleeve slightly. Lift the cable up from the gear selector assembly
-
the 4 screws.
Removing the gear selector assembly stop
Transfer the gear selector assembly stop. See: Printed circuit board gear selector assembly/top panel, replacing See: Printed Circuit Board Gear Selector
Assembly/Top Panel, Replacing.
Removing the solenoid
Transfer the solenoid to the new gear selector assembly
Installation
Note! For tightening torques, see: Tightening torque See: Specifications/Mechanical Specifications.
Installing the cables and gear selector assembly