S60 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2004)
The seal consists of 2 sections but is installed as one unit.
Lubricate the lip of the seal using oil for the Active on Demand Coupling, P/N 116 1641 (1 liter pack).
Use drift 999 7024 Drift pinion seal Haldex coupling See: Tools and Equipment/999 7024 Drift Pinion Seal Haldex Coupling for installation. Position
the section of the seal with the largest outer diameter against the drift. Tap in the seal until the head of the drift is against the final drive housing.
Install the Active on Demand coupling. Fill with oil and check the level. See Clutch (AOC), replacing, M58, M66 AWD, AW50/51 AWD See: Service
and Repair/Clutch (AOC), Replacing.
Refilling the oil in the final drive housing
Top up the oil in the final drive and check the level. See Final drive, replacing, M58, M66 AWD, AW50/51 AWD See: Service and Repair/Final Drive,
Replacing.
Installing the exhaust system
Install the exhaust system. See Final drive, replacing, M58, M66 AWD, AW50/51 AWD See: Service and Repair/Final Drive, Replacing.