S60 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2004)
Shifter M/T: Overhaul
Gear selector lever assembly, reconditioning
Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However,
the essential information in the illustrations is always correct.
Removing the center console
Remove the center console. See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Center Console, Replacing
Removing the gear selector assembly and cables
Remove the gear selector assembly and mechanical cables.
Removing gear selector components
Remove:
-
the catch for the bevel arm
-
bevel arm with bushing and spring
-
the cover for the gear selector lever ball joint. Pull up the ball joint, gear selector lever and rubber sleeve from the gear selector assembly
-
the solenoid.
Removing the old link caps from the gear selector lever