S60 AWD L5-2.5L Turbo VIN 59 B5254T2 (2005)
-
Unscrew the two screws (1) on both sides.
-
Press down the centre pin in the six clips and remove them.
-
Detach the two clips (5) on the underside of the bumper in the same way.
-
Pull the bumper forwards at the same time as pulling both sides out, until the edge is free of the shuttle.
Hint: It is easier if two people perform this procedure.
-
Detach the connector for the fog lamp on both sides.
-
Detach the snap-on coupling for the headlamp washer nozzles on both sides.
Removing the front bumper (applies to the XC70)