S60 AWD L5-2.5L Turbo VIN 59 B5254T2 (2005)
-
Plug in the existing loudspeaker connector (1) to the corresponding connector (2) in the new wiring harness.
-
The remaining connector (3) will be plugged into the loudspeaker.
-
Wrap foam tape from the kit around the connectors to prevent rattling.
-
Repeat the operation on the other side.
-
Reinstall the loudspeakers on the right-hand and left-hand sides by positioning the guide pins in the corresponding D-post holes.
-
Raise the loudspeakers until the catches engage.
-
Push in the red locking mechanism (1).
Applies to the left-hand loudspeaker.
-
Pull out the existing wiring harness (1) from the D-post panel and press it firmly into the loudspeaker clamp (2).
-
Reinstall both loudspeaker grilles.
-
Secure the loudspeaker cables to the existing wiring harnesses at the D-post panel with four tie straps from the kit (two on each side).