volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Adapter 7 to 4 Pole Wiring For Towing|Page 22007 > < Adapter 7 to 4 Pole Wiring For Towing|Page 22005
Page 18
background image

-

Remove the cover in the fuse holder for the main fuses.

-

Pull off the rubber strip at the rear edge of the door opening for the left-hand rear door opposite the lefthand C-post panel.

-

Carefully pry off the left-hand C-post panel sides at the top. Use a plastic weatherstrip tool. Then pull until the three clips on the inside release. Do
not damage the headlining or the panel.

-

Disconnect the connector from any headset sockets.

-

Remove the panel by pulling upwards slightly and unhooking it from the side panel.

-

Remove the rear roof panel covers and the screws beneath them.

-

Carefully pry off the panel at the rear edge. Use a plastic weatherstrip tool.

-

Pull the rear edge of the panel downwards until the four clips on the top release.

-

If the car is equipped with lighting in the panel, unplug the connector from the panel.

-

Pull the panel backwards to release it.

Adapter 7 to 4 Pole Wiring For Towing|Page 22007 > < Adapter 7 to 4 Pole Wiring For Towing|Page 22005