S60 AWD L5-2.5L Turbo VIN 59 B5254T2 (2005)
-
the upper control arm.
-
the anti-roll bar on the new sub-frame. Tighten to 80 Nm.
Note: Lateral link, tie rod, lower control arm and wheel spindle are installed on the new sub-frame as one unit.
Install
-
the wheel spindle to the upper control arm. Do not tighten so hard that the toothed segment goes into the bushing on the wheel unit.
Install
-
the wheel spindle to the upper control arm. Do not tighten so hard that the toothed segment goes into the bushing on the wheel unit
-
the lateral links on the sub-frame. Finger tighten
-
tie rods on the sub-frame. Finger tighten
-
the lower control arm on the sub-frame. Finger tighten.