S60 AWD L5-2.5L Turbo VIN 59 B5254T2 (2005)
Illustration D displays how the cross member is assembled with the brackets
Illustration E displays how to bend the heat deflector plate
-
Clean away any underseal and dirt from the surfaces between the tow hitch and the bodywork.
Illustration B is carried out on both sides. The right side is displayed
-
Install the screws (7, 8) from underneath the brackets (4:1, 5:1, 9:1), including the spacers (6). Tighten by hand. The arrows on the brackets (4:1,
5:1, 9:1) must point towards the centre of the car.
Illustration C
-
Install the heat deflector plate (14) with the screw (12). See point E.
Illustration E
-
Loosely screw the heat deflector plate into place on the member (2) using the screw (1)
-
Bend the heat deflector plate using a screwdriver
-
Fully screw in the screw.
Illustration C