S60 AWD L5-2.5L Turbo VIN 59 B5254T2 (2005)
Install:
-
the brake hose to the caliper (1). Tighten. See: Tightening torque See: Specifications/Tightening Torque
-
brake pipe in the hose (2). Tighten. See: Tightening torque See: Specifications/Tightening Torque.
Check the brake hose
Ensure that the brake hose is not twisted. If necessary alter the hose at the other end (brake pipe end).
Note! If the brake hose is twisted it may rub against the tire, rim or wheel arch. This could cause the circuit to fail.
Top up with brake fluid and bleed the braking system. See: Brake system, bleeding (using bleeding unit) See: Brake Bleeding/Service and Repair/Brake
System, Bleeding (Using Bleeding Unit).
Install the wheel. See: Installing wheels See: Maintenance/Wheels and Tires/Wheels/Service and Repair.