S60 AWD L5-2.5L Turbo VIN 59 B5254T2 (2005)
Install:
-
the brake pipe in the ABS hydraulic modulator. Tighten to 17 Nm
-
the pipe in its holder. Open the holder
-
the ABS line in its clips on the brake pipe
-
the integrated relay / fusebox. See Hydraulic unit, replacing See: Hydraulic Control Assembly - Antilock Brakes/Service and Repair
-
the air cleaner (ACL) housing. See Brake pipe master cylinder / ABS unit, replacing See: Brake Pipe Master Cylinder / ABS Unit, Replacing.
Brake pipe right front, replacing
Clean around the brake pipe on the ABS hydraulic modulator. Remove the brake pipe from the ABS hydraulic modulator and holder